Media Center
  • Reactor Vessel

    Reactor Vessel Inspection

    In-Service Inspection

    Reducing the hassles of reactor vessel examinations

    This new manipulator can support full 10-year, intermediate and follow-up surveillance inspections with minimal disruption of outage activity. Because of its technical innovation, plant operators no longer have to endure many of the hassles previously associated with in-service inspections. It’s the Trans-World System (TWS) remotely operated manipulator. It reduces vessel occupation time (VOT) and minimizes site resource requirements for ultrasonic examinations of reactor vessels.

    Trans-World System (TWS) World Record RPV 10 yr ISI Exam — 2.92 days for CE plant

    Reactor Vessel Head Inspection

    RVCH CRDM Nozzle Inspections

    • Industry best blade probe performance and dual blade probe capability
    • Qualified both Rotating and Blade probes to new PDI requirements
    • Significant dose reduction due to remote installation, removal and operation
  • PWR

    PWR Internals Inspection

    Reliability & Predictability for PWR Internals

    You can be confident in having a partner to help you respond to emergent challenges for Non-Destructive Examination (NDE) of internals. When utilities seek a major supplier to the U.S. market, they are turning to Framatome. Because here, NDE doesn’t just mean Non-Destructive Examination. It means No Delays or Excuses. Only Framatome has the deep global bench strength necessary to immediately respond to your emergent issues. But equally important, we have a proven track record of adapting to schedule variations and minimizing outage impact. With our established, worldwide suppliers and vendors to fabricate code hardware, additional tools and software, you can achieve predictable outages for all aspects of your NDE for internals.

    Check out the facts and celebrate—this is NDE you can count on:

    • Baffle Bolts — SUSI best inspection solution thus far; highly successful in W two-loop plants
    • UFIT Tool — Upper Flange Inspection Tool available
    • LFWIT — Lower Flange Inspection Tool available
    • As a fully integrated supplier, we can help you perform internals inspections simultaneously with disassembly and refueling services to shorten schedule and minimize costs
    • We have the tools, experience and capability to handle MRP requirements
    • Integrated Solutions for MRP 227 / 228
    • Life Extension Requirements
    • Engineering disposition and analysis performed for all OEM plants
    • SUSI submarine baffle bolt UT
    • EDM machining to replace bolts and minimize FME issues
    • U.S. Leader for MRP exams
    • Mock-up simulations promote reliability and predictability
  • BWR

    BWR Cutting-Edge Inspection Systems

    HawkEYE IVVI Inspection for BWRs

    Better BWR Inspection Coverage. Period.

    BWR in-vessel visual inspection (IVVI) requirements challenge utilities, especially in high flow conditions. Plus, as regulators review visual examination methods more closely, EPRI continues evaluating the adequacy of current inspection methods. That’s why Framatome offers the innovative HawkEYE remote mechanized visual inspection system for your BWRs. HawkEYE provides better images and access to more areas for inspection without increasing your outage schedule or personnel exposure. 

    Since its introduction, HawkEYE has obtained images of BWR equipment previously excluded from inspection. HawkEYE inspects jet pumps, feedwater piping, core-spray piping, and core-spray spargers directly above the fuel. In fact, HawkEYE has increased coverage for Jet Pump exams (DF-1, RS-2) from 30 percent to as much as 75 percent. 

    Check out the facts and celebrate. This is BWR inspection coverage you can count on:


    • Quickly reaches hard-to-inspect areas
    • Produces video quality unmatched by manual methods
    • Works with or without a work platform
    • Is operated remotely to minimize dose
    • Enables parallel refuel and vessel maintenance activities

    Simple, Robust Telescoping Mast

    HawkEYE’s simple, robust telescoping mast delivers a remotely-controlled tool head equipped with a camera. The robust mast reduces flow-induced camera motion for improved image quality, and accesses the annulus area between the shroud and the vessel. It then rotates from the annulus to the core area, and accesses the area above the annulus to perform required inspections. 

    Operates on Proven Cart/Ring Technology for Convenience

    HawkEYE can also operate on the proven cart/ring technology used at various sites, performing shroud inspections that are “transparent” to the refuel floor schedule. Using this system, bridge support is needed only for installation and removal of the ring, cart, and HawkEYE manipulator. The manipulator’s design enables utilities to start inspecting the annulus prior to the shutdown cooling isolation window, providing margin for added work scopes or schedule slippage. 

    Field-Proven Underwater Technology

    HawkEYE’s underwater technology, field-proven in numerous applications, includes a sealed housing on all motors. This housing maneuvers both industry-proven color and radiation-tolerant black-and-white inspection cameras.

    Jet Pump Mixer/Diffuser UT

    • 12 hours typical inspection time for 20 beams
    • Detected all required flaws in EPRI demo block
    • Tooling and Techniques seen as INPO “Best Practice”

    Core Shroud UT

    • Industry’s best two-sided coverage
    • Innovative NDE with Phased Array
    • Resolver for position encoding to improve data reliability
    • Segmented mast facilitates installation / removal without crane support

NDE Training Courses

As a world leader in commercial nuclear services, Framatome requires a robust program of training in order for its leaders and technicians to successfully inspect, repair, and maintain components of power generation facilities worldwide. Our technicians are trained in a variety of nondestructive examination (NDE) disciplines, including dye penetrant, eddy current, magnetic particle, ultrasonic and visual examination. See the course descriptions below.

The Framatome NDE training courses are based on the requirements of Title 10 of the Code of Federal Regulations (10CFR50.55a), the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, the American Society of Nondestructive Testing ASNT-TC-1A and ANSI/ASNT CP-189 guidelines. Other equally important nuclear industry standards, such as the EPRI Pressurized Water Reactor Steam Generator Examination Guidelines, are implemented as required to fulfill customer requirements.

  • ECT - Eddy Current Training - 100 Level


    Eddy Current Platform Support Technician

    (16 hours)

    This specialized course covers the basic elements of eddy current steam generator platform support to include equipment and platform setup, basic probe driver maintenance, probe changes and support activities for manipulator operation. Students learn inspection activities related to eddy current testing of steam generator tubing and other essential work practices for PWR reactor containment building and radiological environments.

  • ECT-126 - Eddy Current Familiarization Course


    Eddy Current Familiarization

    (typically three days)

    The Eddy Current Familiarization course is an introduction to the NDE method and to how Electromagnetic Testing (ET) can be applied in the nuclear industry. A broad range of topics are synopsized, beginning with an overview of the science and history behind eddy current, and then continuing with discussions of eddy current inspection techniques for SG tubing and RV welds and nozzles. Data acquisition, analysis, data management and tube integrity are reviewed. How applicable ASME Codes and industry guidelines shape the ET examination process are also discussed. The course is presented by an experienced ET Level III Examiner, along with a number of specialist speakers to cover the various topics. The program and curriculum are informal, and some individual topics may be added, deleted or emphasized based upon student interests.

    The Eddy Current Familiarization course is intended for the non-specialist, who would benefit from a general understanding of the theory and applications of eddy current examinations. Each student is provided a computer and data analysis software to present common eddy current signals from calibration standards and actual in-service examinations. Participants will become familiar with the basic parts of the eddy current display and the formation of eddy current signals, in order to understand and be able to discuss the results of an ET examination. Note that this course is not for certification purposes, and a detailed study of data analysis is outside of the scope of this three-day program.

  • NDE for Engineers

    NDE for Engineers

    NDE for Engineers

    (24 hours)

    This course is designed for anyone who directly or indirectly is affected by NDE. No prior experience is needed in NDE or ASME Codes as the course dissects these Codes for the student.

    Students will learn the basic principles of several NDE methods commonly used in the nuclear industry: liquid penetrant, magnetic particle, visual weld inspection, ASME III visual inspections, and ASME XI visual inspections. In addition, the principles of the eddy current, radiography, and ultrasonic examination techniques are covered. In the end, students will spend an afternoon actually performing some of these techniques.

    The course provides an overview of why the nuclear industry does what it does in NDE terms. The material covers federal regulation, relevant ASME Section III subsections as well as ASME Section XI. This material is reviewed in detail with students to aid students in determining what NDE is required for various applications. The interrelation of these various codes is also explained in detail.

    Practical exercises are used to provide students with the opportunity to consult the various codes and determine, on their own, what NDE methods are most appropriate for the application. Actual situations from our business are used to illustrate practical applications in the student's daily work.

    While the title states “for engineers,” this class is also beneficial for supervisors and managers of personnel. Past students have included engineers, vice presidents of organizations, foreign authorized nuclear inspectors, and personnel from subcontracted NDE companies.

Contact Us

Robin Carey
Business Development Manager, NDE Solutions
Tel: 434.832.3987